Data Acquisition

WISE-7519ZM/S

  • Runs on browsers, no extra software tool is required.
  • No more programming, Web pages provided for control logic editing.
  • IF-THEN-ELSE logic rules execution ability.
  • Built-in I/O (AI: 10 Channels; DO: 3 Channels).
  • Support I/O channel monitoring/control, Timer, Schedule operations.
  • Support non-SSL Email sending and CGI Command sending operations.
  • Modbus TCP Protocol for SCADA System Integration.
  • MQTT Protocol for IT & IoT (Internet of Things) System Integration.
  • IEEE 802.3af-compliant Power over Ethernet (PoE).
  • 2-port Ethernet Switch for Daisy-Chain Topology.

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.

WISE-7519ZM/S is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Open thermocouple detection and ESD/ EFT/Surge protection mechanisms are also included. The three digital output channels can be set as alarm outputs. WISE-7519ZM/S follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7519ZM/S also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.

By integrating with IF-THEN-ELSE rule engine, WISE-7519ZM/S provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, non-SSL E-mail sending & CGI Command sending for use in various industrial applications. WISE-7519ZM/S also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.
 

Application

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Specifications

 Software
 Protocol • Modbus TCP
• CGI Command (Sending)
• MQTT Client (non-SSL)
• Active I/O (MQTT Publish)
 Function • Web Interface for Configuration
• IF-THEN-ELSE Logic operation (72 rules supported)
• I/O channel monitoring and control
• Timer operation (24 set supported)
• Schedule operation (24 set supported)
• Internal Register operation (48 set supported)
• Recipe operation (24 set supported)
• Advanced P2P (8 set supported)
• non-SSL Email sending function
• SNTP Time Synchronization

 

 CPU Module
 CPU 32-bit CPU (80 MHz)

 

 Isolation
 Intra-module Isolation 2500 VDC

 

 EMS Protection
 EFT (IEC 61000-4-4) ±2 kV for Power Line
 ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
 Surge (IEC 61000-4-5) ±2 kV for Power Line

 

 LED Indicators
 Status 1 x PoE Power
1 x System Running
1 x Ethernet Link/Act
13 x I/O Channel Status

 

 Analog Input
 Channels 10 (Differential)
 Type ±15 mV, ±50 mV, ±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN43710)
 Stable and Consisten Temperature Output Yes
 Resolution 16-bit
 Accuracy ±0.1% of FSR or better
 Sampling Rate 10 Samples/Second (Total)
 Input Impedance > 300 kΩ
 Common Mode Rejection 86 dB Min.
 Normal Mode Rejection 100 dB
 Overvoltage Protection 240 Vrms
 Individual Channel Configuration Yes
 Channel-to-Channel Isolation Yes, ±400 VDC
 Open Wire Detection Yes
 Zero Drift ±0.5 μV/°C
 Span Drift ±25 ppm/°C

 

 Digital Output
 Channels 3
 Type Isolated Open Collector
 Sink/Source (NPN/PNP) Sink
 Load Voltage +5 VDC ~ +50 VDC
 Load Current 650 mA/Channel
 Overvoltage Protection 60 VDC
 Overload Protection 1.4 A
 Short-circuit Protection Yes

 

 Ethernet
 Ports RJ-45 x 2, 10/100 Base-TX, Swtich Ports (LED indicators)
 PoE Yes

 

 Power
 Reverse Polarity Protection Yes
 Input Range 12 ~ 48 VDC
 Consumption 3.6 W
 Powered from PoE Yes, IEEE 802.3af, Class 1
 Powered from Terminal Block Yes, 12 ~ 48 VDC

 

 Mechanical
 Dimensions (mm) 97 x 114 x 38 (W x L x H)
 Installation Wall Mounting

 

 Environment
 Operating Temperature -25 ~ +75 °C
 Storage Temperature -30 ~ +80 °C
 Humidity 10 to 90% RH, Non-condensing

 

Accessories

GPSU06U-6 MDR-20-24 NS-205
GPSU06U-6
 MDR-20-24 NS-205

Description

 PRODUCT SERIES     DESCRIPTION    QNT   INQUIRY
WISE-7519ZM/S     CR  Intelligent I/O Module with 2-port Ethernet Switch, 10-ch AI, 3-ch DO and PoE. Supports Modbus/TCP and MQTT (RoHS)
Includes DB-1820 Daughter Board		 1