High Speed Modules

F-8084

  • 32-bit counter
  • 8 up-counter/frequency channels
  • 1 ~ 32767 us digital filter
  • Falling/Rising/Both edge trigger
  • RoHS compliance
  • 3000 VDC isolation from output to backplane
  • 3000 VDC isolation from output to frame ground
  • Redundancy
  • No error counting when redundant switching

Introduction

The F-8084 is a 32-bit high speed up-counter/frequency module. It can count up to 500 KHz input signal, and accuracy of the frequency mode is +/-0.4% FSR. The F-8084 features many diagnostic like some failures of communication, EEPROM, WDT, decoder, etc. When the modules are in the redundant mode and a failure occurs the slave module will take over as soon as possible. Moreover, the redundant switching is not only fast but also reliable for data exchanging. Thus, users can easily to use F-8084 to count.

Application

 Building Automation

 Factory Automation

 Machine Automation

 Remote Maintenance

 Remote Diagnosis

 Testing Equipment

Specifications

 

 EMS Protection
 EFT (IEC 61000-4-4) Yes
 ESD (IEC 61000-4-2) Yes

 

 LED Indicators
 Status 1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status)

 

 Counter/Frequency/Encoder Input
 Channels 8
 Type Counter/Frequency
 ON Voltage Level 4.5 VDC~ 30 VDC
 OFF Voltage Level < 1 VDC
 Frequency Accuracy 1 Hz ~ 500 KHz
 Low Pass Filter Yes (1 ~32767 us)
 Input Impedance 200/500/1KΩ or none (5 KΩ)
   
   
   
   
   

 

 I/O Expansion
 I/O Type DN-PI-M

 

 Power
 Consumption 1.9 W

 

 Mechanical
 Dimensions (mm) 30 x 85 x 115
 Weight 300 g

 

 Environment
 Operating Temperature -25 °C ~ +75 °C
 Humidity 5 ~ 95% RH, Non-condensing

 

Accessories

CA-37100AM CA-3710AM CA-3710D

Description

 PRODUCT SERIES     DESCRIPTION    QNT   INQUIRY
 F-8084     CR  8-ch Isolated High Speed Pulse Input Redundant Module (RoHS) 1