Data Acquisition

M-6088-32

  • 32-channel PWM Output
  • Burst Mode and Continuous Mode for PWM Output
  • Individual and Synchronous PWM Output
  • Supports DCON and Modbus RTU Protocols
  • Embedded Dual Watchdog

Introduction

The M-6088-32 provides 32-channel PWM (Pulse Width Modulation) Output, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. When required, communication with the M-6088-32 can be programmed based on the Modbus RTU and the DCON protocol, with the added benefit that different addresses can be configured via hardware to allow for Modbus RTU communication.

Application

  • Heating system in buildings
  • Ventilation system
  • Controlling Fan Speed

Specifications

 CPU Module
 Watchdog Timer Module, Communication (Programmable)

 

 Isolation
 Intra-module Isolation 2500 VDC

 

 EMS Protection
 EFT (IEC 61000-4-4) ±4 kV for Power
 ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
 Surge (IEC 61000-4-5) ±2 kV for Power Line

 

 LED Indicators
 Status 1 x Power and Communication

 

 PWM
 Channels 32
 Type Open Collector
 Sink/Source (NPN/PNP) Sink
 Load Voltage +5 ~ +40 VDC
 Frequency 50 Hz
 Duty Cycle 0.1 to 99.9 %
 Mode Burst, Continuous
 Burst Count 1 to 65535
 Power-on Value Yes
 Safe Value Yes

 

 COM Ports
 Ports 1 x RS-485
 Baud Rate 1200 ~ 115200 bps
 Data Format (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1)
 Protocol Modbus RTU, DCON
 Bias Resistor No. Usually supplied by the RS-485 Master also add an optional tM-SG4 or SG-785.

 

 Power
 Reverse Polarity Protection Yes
 Input Range +10 ~ +48 VDC
 Consumption 1.0 W Max.

 

 Mechanical
 Dimensions (mm) 116 x 120 x 64 (W x L x H)

 

 Environment
 Operating Temperature -25 ~ +75 °C
 Storage Temperature -40 ~ +80 °C
 Humidity 10 ~ 95% RH, Non-condensing

 

Description

 PRODUCT SERIES     DESCRIPTION    QNT   INQUIRY
 M-6088-32     CR  32-channel PWM Output Module using the DCON and Modbus Protocols (RoHS) 1