Data Acquisition

ET-7060

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • Dual Watchdog
  • I/O Pair Connection
  • Built-in I/O
    • DI/Counter: 6 Channels
    • Power Relay: 6 Channels

Introduction

The ET-7060 provides 6 wet contact digital input channels and 6 form A electromechanical relays. It features optical isolation for 3000 VDC of transient overvoltage protection and doesn't have channel-to-channel isolation. Each input channel can be used as a 32-bit counter. The power-on value and safe value of the relay are programmable. Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These flyback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these flyback voltages at your inductive load by installing a flyback diode for DC loads or a metal oxide varistor for AC loads.

Application

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, and Testing Equipment.

Specifications

 Software
 Built-in Web Server Yes

 

 CPU Module
 Watchdog Timer Module, Communication (Programmable)

 

 Isolation
 2-way Isolation Ethernet: 1500 VDC
I/O: 2500 VDC

 

 EMS Protection
 EFT (IEC 61000-4-4) ±4 kV for Power Line
 ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
 Surge (IEC 61000-4-5) ±0.5 kV for Power Line

 

 LED Indicators
 Status Run, Ethernet

 

 Digital Input/Counter
 Channels 6
 Type Wet Contact
 Sink/Source (NPN/PNP) Sink/Source
 ON Voltage Level +10 to +50 VDC
 OFF Voltage Level +4 VDC (max.)
 Max. Counts 4,294,967,295 (32-bit)
 Frequency 500 Hz
 Min. Pulse Width 1 ms
 Input Impedance 10 KΩ
 Overvoltage Protection +70 VDC

 

 Relay Output
 Channels 6
 Type Power Relay, Form A (SPST N.O.)
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 10 ms (max.)
Release Time 5 ms (max.)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 × 10^7 ops.
Power on Value Programmable
Safe Value Programmable

 

 Ethernet
 Ports 1 x RJ-45, 10/100 Base-TX
 Security ID, Password and IP Filter
 Protocol Modbus TCP, Modbus UDP

 

 Power
 Reverse Polarity Protection Yes
 Consumption 2.9 W (max.)
 Powered from Terminal Block +10 to +30 VDC

 

 Mechanical
 Dimensions (mm) 72 x 123 x 35 (W x L x H)
 Installation DIN-Rail mounting

 

 Environment
 Operating Temperature -25 ~ +75 °C
 Storage Temperature -30 ~ +80 °C
 Humidity 10 to 90% RH, Non-condensing

 

Description

 PRODUCT SERIES     DESCRIPTION    QNT   INQUIRY
 ET-7060     CR  Ethernet I/O Module with 6-ch Power Relay and 6-ch DI (RoHS) 1