Providing a variety of digital I/O functions, the ET-2268 module is an Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol industrial application and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2268 module perfectly integrated with the HMI, SCADA, PLC, or other software systems.
The ET-2268 provides 4 Form A signal Relay output and 4 Form C signal relay output channels. With 2 Ethernet ports, the ET-2268 allows a daisy chain connection which enables flexibility in locating devices; easy installation, and lower infrastructure costs. This module includes 8 LED indicators that can be used to monitor the Relay Output status, and options are provided that allow power-on and safe Digital Output values to be configured. It features 8 kV ESD, 4 kV EFT, and 3 kV surge protection to enhance noise protection capabilities in industrial environments. The ET-2268 is the ideal solution for small signal switching.
The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2268 module can poll the status of remote DI channels via the Modbus TCP protocol and write data to local DO channels.
It is equipped with a removable terminal block connector for easy and robust wiring in industrial applications and features a powerful 32-bit ARM MCU to handle efficient network trafficking.
ET-2268 module supports MQTT protocol and can act as a message publisher and subscriber. After connecting to the server MQTT Broker, the I/O status of the module can be published in the form of a topic, and can also receive messages from the same subscription topics. In communication, when the ET-2268 module is disconnected from the broker, the module has a reconnection mechanism that can automatically reconnect with the broker. In addition, there is a Keep-Alive Interval mechanism to ensure that the connection with the Broker is always maintained.
The ET-2268 supports the standard SNMP V2c specification. Through this specification, ET-2200 can transmit module information and I/O information to SNMP network management equipment or software (SNMP Network Management Software) to help administrators monitor the status of ET-2200 in real time. If the Trap function is enabled, when the module I/O status changes or reboots, it can send a message to the manager to keep track of the channel status at any time.
Factory, Building and Home Automation Remote Maintenance
|Built-in Web Server||Yes|
|Watchdog Timer||Module, Communication (Programmable)|
|2-way Isolation||Ethernet: 1500 VDC
I/O: 2500 VDC
|EFT (IEC 61000-4-4)||±4 kV for Power Line|
|ESD (IEC 61000-4-2)||±8 kV Contact for Each Terminal
±16 kV Air for Random Point
|Surge (IEC 61000-4-5)||±3 kV for Power Line|
|Status||Run, Ethernet, I/O|
|Channels||8 (Form A x 4, Form C x 4)|
|Contact Material||Siler Nickel, Gold-covered|
|Contact Rating||2 A @ 30 VDC
0.24 A @ 220 VDC
0.25 A @ 250 VDC
|Operate Time||3 ms (typical)|
|Release Time||4 ms (typical)|
|Electrical Endurance||2 x 10^5 ops|
|Mechanical Endurance||10^8 ops|
|Power on Value||Programmable|
|Ports||2 x RJ-45, 10/100 Base-Tx, Switch Ports|
|Security||Password and IP Filter|
|Protocol||Modbus TCP, Modbus UDP, MQTT, and SNMP V2c|
|Reverse Polarity Protection||Yes|
|Consumption||3.6 W (max.)|
|Powered from Terminal Block||+10 to +30 VDC|
|Dimensions (mm)||33 x 126 x 108 (W x L x H)|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-40 ~ +80 °C|
|Humidity||10 to 90% RH, Non-condensing|
|ET-2268 CR||Ethernet I/O Module with 2-port Ethernet Switch, 4-ch Form A and 4-ch Form C Signal Relay (RoHS)||1|