Providing various digital I/O functions, the ET-2261 module is an Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industry and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2261 module perfect integration with the HMI, SCADA, PLC, and other software systems.
The ET-2261 supports 10 Form A electromechanical relays output channels. With 2 Ethernet ports, the ET-2261 allows daisy chain connection which permits flexibility in locating devices, eases installation, and lowers infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge, and 3000 VDC I/O isolation to enhance noise protection capabilities in industrial environments.
The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2261 module can poll the status of remote DI channels via the Modbus TCP protocol and write data to local DO channels.
It is equipped with a removable terminal block connector for easy and robust wiring in industrial situations and features a powerful 32-bit ARM MCU to handle efficient network trafficking.
ET-2261 module supports MQTT protocol and can act as a message publisher and subscriber. After connecting to the server MQTT Broker, the I/O status of the module can be published in the form of a topic, and can also receive messages from the same subscription topics. In communication, when the ET-2261 module is disconnected from the broker, the module has a reconnection mechanism that can automatically reconnect with the broker. In addition, there is a Keep-Alive Interval mechanism to ensure that the connection with the Broker is always maintained.
The ET-2261 supports the standard SNMP V2c specification. Through this specification, ET-2200 can transmit module information and I/O information to SNMP network management equipment or software (SNMP Network Management Software) to help administrators monitor the status of ET-2200 in real time. If the Trap function is enabled, when the module I/O status changes or reboots, it can send a message to the manager to keep track of the channel status at any time.
Factory, Building and Home Automation Remote Maintenance
|Built-in Web Server||Yes|
|Watchdog Timer||Module, Communication (Programmable)|
|2-way Isolation||Ethernet: 1500 VDC
I/O: 2500 VDC
|EFT (IEC 61000-4-4)||±4 kV for Power Line|
|ESD (IEC 61000-4-2)||±8 kV Contact for Each Terminal
±16 kV Air for Random Point
|Surge (IEC 61000-4-5)||±3 kV for Power Line|
|Status||Run, Ethernet, I/O|
|Type||Power Relay, Form A (SPST N.O.)|
|Contact Rating||5 A @ 250 VAC/24 VDC (Resistive Load)|
|Operate Time||10 ms (max.)|
|Release Time||5 ms (max.)|
|Electrical Endurance||10^5 ops|
|Mechanical Endurance||2 x 10^7 ops|
|Power on Value||Programmable|
|Ports||2 x RJ-45, 10/100 Base-Tx, Switch Ports|
|Security||Password and IP Filter|
|Protocol||Modbus TCP, Modbus UDP, MQTT, and SNMP V2c|
|Reverse Polarity Protection||Yes|
|Consumption||3.8 W (max.)|
|Powered from Terminal Block||+10 to +30 VDC|
|Dimensions (mm)||33 x 126 x 108 (W x L x H)|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-40 ~ +80 °C|
|Humidity||10 to 90% RH, Non-condensing|
|ET-2261 CR||Ethernet I/O Module with 2-port Ethernet Switch and 10-ch Power Relay (RoHS)||1|