PROCESS INDICATOR

CS1-8

Specifications

 Display & Functions
 LED:  Numeric: 5 digits, 0.8”(20.0mm)H red high-brightness LED
RS 485 communication: 1 square orange LED
 Display range: -19999~29999;

 

 RS 485 Communication(option)
 Protocol: Modbus RTU mode
 Baud rate: 1200/2400/4800/9600/19200/38400 programmable
 Data bits: 8 bits
 Parity:  Even, odd or none (with 1 or 2 stop bit) programmable 
 Address:  1 ~ 255 programmable
 Remote display:  to show the value from RS485 command of master
 Distance:  1200M 
 Terminate resistor:  150Ω at last unit.
   

 

 Electrical Safety
Dielectric strength:  AC 2.0 KV for 1 min, Between Power / Input / Output / Case
Insulation resistance:  ≥100M ohm at 500Vdc, Between Power / Input / Output
Isolation:   Between Power / Input / RS485
EMC:  EN 55011:2002; EN 61326:2003 
Safety(LVD):  EN 61010-1:2001

 

 Environmental
 Operating temp.:  0~60 ˚C 
 Operating humidity:  20~95 %RH, Non-condensing
 Temp. coefficient:  ≤100 PPM/˚C 
 Storage temp.:  -10~70 ˚C
 Enclosure:  Front panel: IEC 529 (IP52); Housing: IP20

 

 Mechanical
 Dimensions:  96mm(W) x 48mm(H) x 72mm(D)
 Panel cutout:  92mm(W) x 44mm(H)
 Case materiel:  ABS fire-resistance (UL 94V-0)
 Mounting:  Panel flush mounting
 Terminal block:  Plastic NYLON 66 (UL 94V-0)
10A 300Vac, M2.6, 1.3~2.0mm2
(16~22AWG)
 Weight:  350g

 

 Power
 Power supply:  AC115/230V,50/60Hz;
Optional: AC 85~264V / DC 100~300V or DC 20~56V
 Excitation supply:  DC24V/30mA maximum in standard 
 Power Consumption:  3.0VA maximum
ADH/ADL: 8VA/4.0W
 Back up memory:  By EEPROM

 

Description

CS1-8 has been designed for remote display by RS485 (Modbus RTU Mode) interface

 

Selection Information